Please pay more attention to the design when you choose MIM technology:
Wall thickness less than 6 mm is suitable for MIM. Thicker outer walls are OK, but the cost will increase due to long processing time and additional materials. In addition, the very thin wall with a...Read More
Metal powder injection molding has been widely used in mechanical industry, electronic industry, automobile industry, office automatic industry, wearable devices, photoelectric industry, military industry, medical devices etc.Read More
Mold level determines the quality level of medical device products, which usually consumes a lot of cost and time of manufacturers. Withal, a company in the United States has developed a set of solutions, using injection molding technology to achieve the required surface...Read More
Metal powder injection molding (MIM) USES chemical or thermal decomposition method to remove the binder in the forming billet and obtain the product through sintering densification. Compared with the traditional process, MIM technology has the characteristics of high...Read More
When the die structure allows, the corner of each surface of the die parts should be designed as rounded as possible to avoid stress concentration.For concave die, cavity and part of punch, core, can use combination or Mosaic structure to eliminate stress concentration,...Read More
To improve the quality of mould, we can start from the selection of mould materials, the usability of mould structure, the safety performance and the maintainability of mould parts.Because the mold is a tool with many different mold parts, some of them need to be replaced...Read More
1, Rational design the mold amplification coefficient. In the premise of successful forming, minimize the volume of binder.
2, Rational mold structure. Precision parts need a certain intensity, easy replacement and rational tolerance. Forming blank holes need positive...Read More
When making MIM tools, the general alternating is 20--50 Mpa with cool and hot change. When making super precision MIM tools, the molding press is several times than normal ones. MIM tools file can be hundreds of thousands times, so it must be tough and hard enough.Read More
When making MIM tools, the general alternating is 20--50 Mpa with cool and hot change. When making super precision MIM tools, the molding press is several times than normal ones. MIM tools file can be hundreds of thousands times, so it must be tough and hard enough.Read More
Mold is the mother of industry. Die technology, to a large extent, determines the cost, quality and yield of products and even functional characteristics. Metal powder injection moulds are the basic components of MIM process. The main structure of metal injection moulds...Read More
Moulds do not have gorgeous clothes like products. Moulds are just a hard piece of steel to be adjusted by driving vehicles. A piece of special steel which needs to be designed, drawn, purchased, roughed, heat treated, etc. (such as electrical processing, wire cutting,...Read More
Tooling Core Material: SKD11 Die Formwork Material:SKD11 Cavity:1+1 Glue Gate Way：Big Water Inlet Pattern Method: PL Product Shrinkage: 1.216 Core Hardness:52-58HRC Mould Design Requirement: There are several differences between MIM and standard plastic molds. MIM thermal...Read More
We are professional tooling suppliers in China, providing customized MIM and PIM products by MIM processing and metal injection moulding. Be free to buy high quality MIM tooling from our factory. Also, quotation is available.
